User Manual

4: Network Settings
PremierWave EN User Guide 26
WLAN Profile Advanced Settings
Description
Antenna Diversity
Selects the antenna the radio will use or allows the
PremierWave EN to automatically make the selection.
 Enabled = allow the PremierWave EN to select the
antenna.
 Antenna 1 = use the internal antenna.

Antenna 2 = use the external antenna.
Power Management
Power management reduces the overall power consumption
of the PremierWave EN unit, but can increase latency.
 Enabled = allows the PremierWave EN to turn off the
receiver when it is idling.

Disabled = keeps the receiver on at all times.
Power Management Interval
Number of beacons (100 ms interval) between 1 and 10. The
above-mentioned latency can be up to this number X 100ms.
Table 4-14 Using the CLI to Configure WLAN Profile Advanced Settings
Command level
enable>configure>wlan profiles>edit (profile
name)>advanced
Table 4-15 Using XML to Configure WLAN Profile Advanced Settings
Configuration group name
wlan profile:(profile name)
WLAN Profile Security Settings
The PremierWave EN supports WEP, WPA, and WPA2/IEEE 802.11i to secure all wireless
communication. WPA and WPA2/IEEE 802.11i are not available for Adhoc topology.
The WPA2/IEEE 802.11i mode is compliant with the Robust Secure Network specified in the
IEEE standard 802.11i.
WLAN Profile Security Settings
Description
Suite
Specifies the security suite to be used for this profile.
None = no authentication or encryption method will be used.
WEP = Wired Equivalent Privacy
WPA = WiFi Protected Access
WPA2
= Robust Secure Network.
Key Type
Selects the format of the security key.