User Manual
Table Of Contents
- PremierWave EN User Guide
- 1: Using This Guide
- 2: Introduction
- 3: Using DeviceInstaller
- 4: Network Settings
- 5: Line and Tunnel Settings
- 6: Configurable Pin Manager
- 7: Services Settings
- 8: Security Settings
- 9: Maintenance and Diagnostics Settings
- 10: Advanced Settings
- 11: Tunneling
- 12: Security in Detail
- 13: Updating Firmware
- A: Technical Support
- B: Binary to Hexadecimal Conversions
- C: Compliance
- D: Warranty
- E: USB-CDC-ACM Device Driver File for Windows Hosts
- Index
1: Using This Guide
PremierWave EN User Guide 11
Additional Documentation
Visit the Lantronix Web site at www.lantronix.com/support/documentatio for the latest
documentation and the following additional documentation.
n
Document
Description
PremierWave EN Integration Guide
Information about the PremierWave EN hardware,
testing the PremierWave EN using the demonstration
board, and integrating the PremierWave EN into your
product.
PremierWave EN Command Reference
Instructions for accessing Command Mode (the
command line interface) using a Telnet connection,
SSH connection or through the serial port. Detailed
information about the commands. Also provides details
for XML configuration and status.
PremierWave Eval Board Quick Start
Instructions for getting the PremierWave EN
demonstration board up and running.
PremierWave Eval Board User Guide
Information needed to use the PremierWave
on the demo board.
DeviceInstaller Online Help
Instructions for using the Lantronix Windows-based
utility to locate the PremierWave EN and to view its
current settings.
Com Port Redirector Quick Start and
Online Help
Instructions for using the Lantronix Windows-based
utility to create virtual com ports.
Secure Com Port Redirector User Guide
Instructions for using the Lantronix Windows-based
utility to create secure virtual com ports.