User Guide
Table Of Contents
- Contacts
- Revision History
- 1 Introduction
- 2 Applicable Module
- 3 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 4 Compliant/Allowable Tx Power Settings
- 5 Allowable Antennas to use with the Radio Module
- 6 Antenna Placement and RF Safety
- 7 Simultaneous Transmission with other Integrated or Plug-in Radios
- 8 Module May Not Be Installed by End Users
- 9 Required Labeling on the Outside of the Host
- 10 Required Labeling on the Module
- 11 Required Regulatory Wording for End User Manual / Installation Manual
- 12 OEM Integrator Checklist
Open-Q 845 uSOM Module Certification OEM Integrator Guide
5
1 Introduction
This document describes the steps that the OEM integrator must follow when designing and
manufacturing a system utilizing the Open-Q 845 uSOM Transmitter Module.
Failing to follow the instructions in this document may invalidate the FCC and IC (Industry Canada)
certifications and authorizations of the Module for use in the U.S. and Canada.
The Module certifications described in this document apply only to radio conformance for the Module. The
OEM integrator is responsible for all system-level EMI/EMC and Product Safety testing and certifications
that apply to the host system in the U.S. and other countries where the system will be marketed or sold.