Use Instructions
PN 10232 Eagle V1.2 Instructions for Use Rev 1.0 Page 96 of 101
6.3.5. CCD – Contact Charging Device
The Handheld Fluorescence Camera is required to be fully charged before use.
While charging, the device is inoperable with exception to reviewing acquired images and
videos.
While charging, connection to the ECH is not supported.
Table 46 Charging Instructions
1.
Before use, clean and disinfect the Contact Charging Device according to Section 5.3.
2.
Assemble the CCD Power supply and plug the USB Type-C connector into the CCD USB Type-C port.
3.
Pug the CCD Power cord into electrical outlet.
The white LED on the front side of the Contact
Charging Device is illuminated when power is
supplied.