Use Instructions
PN 10232 Eagle V1.2 Instructions for Use Rev 1.0 Page 85 of 101
Table 40 Custom Sterile Sleeve Wired Configuration Instructions
11.
Pull the CSS taut
over the body of
the HFC.
Position the
sheathed HFC
USB Cable along
the bottom and
left side of the
HFC body.
12.
Ensure the HFC remains
positioned in the top right
of the CSS such that any CSS
slack material hangs off the
left side of the HFC, while
the CSS Tape is flush with
the right side of the HFC.
Pull CSS slack material taut
from the bottom and left,
and wrap the HFC in a gift-
wrap style.
13.
Pull off the adhesive backing from
the CSS Tape while keeping the
gift-wrapped CSS material in
position.
Lay the CSS Tape over the gift-
wrapped CSS material.