User's Manual

5: Configuration via Serial Mode or Telnet Port
MatchPort b/g™ User Guide 52
Email Configuration
The unit sends an email to multiple recipients when a specific trigger event occurs.
There are three separate triggers, based on any combination of the configurable pins
(PIO) when selected as user I/O functions. Optionally, use a two-byte serial string to
initiate a trigger. To configure email configuration settings, select option 3 Email from
the Change Setup menu.
Figure 5-7. Email Settings
Mail Server
Enter the IP address of the mail server. Enter each 3-digit section and press Enter
between sections. The current value displays in parentheses.
Mail Server (0.0.0.0) ? ( 0) _
Unit Name
Enter the username used by the MatchPort to send email messages. The current
value displays in parentheses. Spaces are not permitted.
Unit name () ? _