User's Manual

4: Configuration Using Web-Manager
MatchPort b/g™ User Guide 33
the default encryption for WPA.
Key Type Select the key type (Hex or Passphrase).
Key and Retype Key
Enter the Encryption Key in hexadecimal value if the key
type is Hex. Enter the key as a string if the key type is
Passphrase. Passphrase input is not the same as ASCII
input. A passphrase of more than 20 characters is
recommended. Spaces and punctuation characters are
permitted.
Advanced Settings
TX Data Rate MatchPort permits the control of the transmission data rate.
Click the Auto fallback check box to allow the MatchPort to
set the data rate automatically (or leave unchecked to set the
transmission rate manually). The default rate is 11 Mbps.
If the Auto fallback check box is selected, choose the
maximum data rate from the drop-down list.
If the Auto fallback check box was not selected, select the
fixed data rate (in Mbps) from the drop-down list.
Radio Power
Management
Power management reduces the overall power consumption
of the MatchPort unit. Selecting Enable increases the
response time. Power management is not permitted in Ad-Hoc
mode.
Configurable Pin Settings
There are 11 configurable hardware pins on the MatchPort unit. For each pin,
configure the pin function, communication direction, and its activity level. For more
information, see Configurable Pins on page 63.
To configure the MatchPort’s OEM Configurable Pins:
1. On the main menu, click Configurable Pins to open the Configurable Pins page.
Figure 4-13. Configurable Pins Settings
2. Configure or modify the following fields for each pin:
Function From the drop-down list, select the purpose of the specified
pin. See Configurable Pin Functions for a description of each
available function.