User's Manual

4: Configuration Using Web-Manager
MatchPort b/g™ User Guide 31
WLAN Configuration
Without adequate protection, a wireless LAN is susceptible to access by
unauthorized users.
Note: Due to regulations, the country-specific setting has been removed from the
setup menu and Web-Manager. However, we provide a separate utility for changing
the Country/Zone setting. The utility is called SetZone and is included in the
MatchPort package. It is also available for download from the Lantronix web site.
The syntax is SetZone <IP address> [<zone abbreviation>]
Leaving the zone blank causes the utility to report the current setting only. Following
are valid zone abbreviations. These settings are consistent with IEEE802.11b/g
zones:
US=United States CA=Canada
FR=France
SP=Spain
JP=Japan
OT=Others, such as Europe (excluding
France), Asia, Africa, and Australia
To configure the MatchPort’s WLAN settings:
1. On the main menu, click WLAN to open the WLAN Settings page.
Figure 4-12. WLAN Settings