User's Manual

4: Configuration Using Web-Manager
MatchPort b/g™ User Guide 30
To configure the MatchPort’s email trigger settings:
1. On the main menu, click Trigger 1, Trigger 2, or Trigger 3 to configure the
desired Trigger settings. The Email Trigger Settings page opens.
Figure 4-11. Email Trigger Settings
2. Configure the following fields:
Conditions
Configurable Pins Select the condition from the drop-down list for the
configurable pins. Repeat for each Trigger Input field.
Serial Trigger
Enable Serial Trigger
Input
When selected, specified serial communications count as a
trigger input.
Channel
Select the channel prompting the trigger.
Data Size
Select the data size prompting the trigger.
Match Data Enter the data that, when it appears in the communication
stream, prompts a trigger.
Note: All of the conditions must match to send an email notification.
Message Properties
Message The subject line of the trigger event email to the specified
recipient(s).
Priority
The priority level for the email.
Min. Notification Interval The notification interval is the minimum time allowed between
individual triggers. If a trigger event occurs within the minimum
interval since the last trigger, it is ignored.
Re-notification Interval Indicates the time interval in which a new email message is
sent to the recipient(s) when a single trigger event remains
active.