User's Manual

4: Configuration Using Web-Manager
MatchPort b/g™ User Guide 28
Figure 4-9. UDP Connection Settings
Datagram Mode
Datagram Type Configures the remote IP or network broadcast address and
the remote port. Enter 01 for directed or broadcast UDP.
Accept Incoming
Select Yes to accept incoming UDP datagrams. Other options
are No and With Active Mdm Ctrl In.
Endpoint Configuration
Local Port
Enter the local port number.
Remote Port
Enter the port number of the remote device.
Remote Host
Enter the IP address of the remote device.
Use Broadcast Select to broadcast the UDP datagram. The default is not to
broadcast.
Note: Diagrams are sent as subnet-directed broadcasts.