User's Manual

4: Configuration Using Web-Manager
MatchPort b/g™ User Guide 25
With Passive Connect
Select Yes to clear the output buffer with a connection initiated
from the network to the device.
At Time of Disconnect
Select Yes to clear the output buffer when the network
connection to or from the device is disconnected.
Connection Settings - TCP
To configure a channel’s TCP settings:
1. On the main menu, click Connection to open the Connection Settings page for
the channel.
2. In the available fields, enter the following information:
Connect Protocol
Protocol Select TCP from the drop-down list.
Figure 4-8. TCP Connection Settings
Connect Mode: Passive Connection
Accept Incoming Select Yes to accept incoming connections.
Password Required Determines whether a password is required for an incoming
passive connection. Not available when a password is set for