User's Manual

4: Configuration Using Web-Manager
MatchPort b/g™ User Guide 20
Figure 4-4. Ethernet Settings (Wired Only)
To specify how data will be transmitted:
1. Enter the following (as necessary):
Auto Negotiate With this option, the Ethernet port auto-negotiates the speed
and duplex with the hardware endpoint to which it is
connected. This is the default setting.
If this option is not selected, complete the fields that become
available:
Speed: The speed of data transmission. The default setting is
100 Mbps.
Duplex: The direction of data transmission. The default
setting is Full.
2. When you are finished, click the OK button.
3. On the main menu, click Apply Settings.