User's Manual

4: Configuration Using Web-Manager
MatchPort b/g™ User Guide 18
Figure 4-3. Network Settings (Wireless Only)
Network Mode Configuration
To determine the MatchPort’s network mode:
1. Click Network from the main menu.
2. Modify the following:
Network Mode
Select Wireless Only to enable only the wireless network
connectivity for the MatchPort. Select Wired Only to enable
only the Ethernet network connectivity.
Automatic IP Address Configuration
To assign an IP address and its network configuration automatically:
1. Click Network from the main menu.
2. Select Obtain IP address automatically.
3. Enter the following (as necessary):
BOOTP
Select Enable to permit the Bootstrap Protocol (BOOTP). The
BOOTP server automatically assigns the IP address from a
pool of addresses.
DHCP
Select Enable to permit Dynamic Host Configuration Protocol
(DHCP). DHCP automatically assigns a leased IP address to
the MatchPort unit.
AutoIP The MatchPort generates an IP in the 169.254.x.x address
range with a Class B subnet. Select the Enable checkbox to