User's Manual

3: Using DeviceInstaller
MatchPort b/g™ User Guide 15
Supports DynamicIP Non-configurable field. Indicates whether the current IP
address on the MatchPort was set using DHCP or other
automatic method.
Subnet Mask Non-configurable field. Displays the MatchPort’s current
subnet mask. To change the subnet mask, see
4: Configuration Using Web-Manager or 5: Configuration via
Serial Mode or Telnet Port.
Gateway Non-configurable field. Displays the MatchPort’s current
gateway. To change the gateway, see 4: Configuration Using
Web-Manager or 5: Configuration via Serial Mode or Telnet
Port.
Number of Ports Non-configurable field. Displays the number of ports on the
MatchPort.
TCP Keepalive
Non-configurable field. Displays 1-65s, the MatchPort’s TCP
keepalive range. The default setting is 45.
Supports Configurable
Pins
Non-configurable field. Displays True, indicating configurable
pins are available on the MatchPort.
Supports Email Triggers
Non-configurable field. Displays True, indicating email triggers
are available on the MatchPort.
Supports AES Data
Stream
Non-configurable field. Displays True if the MatchPort unit
supports AES encryption.
Supports 485
Non-configurable field. Displays True, indicating the
MatchPort supports the RS-485 protocol.
Supports 920K Baud
Rate
Non-configurable field. Displays False. MatchPort does not
support baud rates up to 920 Kbps.
Supports Wired Ethernet Non-configurable field. Displays True.
Supports HTTP Server Non-configurable field. Displays True.
Supports HTTP Setup Non-configurable field. Displays True.
Supports 230K Baud
Rate
Non-configurable field. Displays True.
Supports GPIO
Communication
Non-configurable field. Displays True, indicating MatchPort
supports communication via General Purpose Input Output
(GPIO).