User's Manual

5: Commands and Levels
connection value <number>
Sets the value to output to the CP Group upon connect mode
connection.
<number> = binary to output (typically 1 or 0).
default connection value
Restores the default value for connect mode connection.
default disconnection value
Restores the default value for connect mode disconnection.
disconnection value <number>
Sets the value to output to the CP Group upon connect mode
disconnection.
<number> = binary to output (typically 1 or 0).
exit
Exits to the next higher level.
group <text>
Configures the CP Group to set upon making or breaking a con-
nect
mode connection.
<text> = CP Group.
no group
Removes the CP Set Group for connect mode.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
cp output (tunnel-accept-cp_output:1) level commands
clrscrn
Clears the screen.
connection value <number>
Sets the value to output to the CP Group upon accept mode con-
nection.
<number> = binary to output (typically 1 or 0).
default connection value
Restores the default value for accept mode connection.
default disconnection value
Restores the default value for accept mode disconnection.
disconnection value <number>
Sets the value to output to the CP Group upon accept mode dis-
connection.
<number> = binary to output (typically 1 or 0).
exit
Exits to the next higher level.
group <text>
Configures the CP Group to set upon making or breaking an ac-
cept
mode connection.
<text> = CP Group.
no group
Removes the CP Set Group for accept mode.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
cpm (cpm) level commands
add <cp> to <group>
Adds the specified CP to the specified group.
<cp> = configurable pin.
<group> = the name of the group to which you want to add the
CP.
add <cp> to <group> <bit>
Adds a specified CP to a specified group at a specified bit posi-
tion.
<cp> = configurable pin.
<group> = the name of the group to which you want to add the
CP.
<bit> = bit position.
clrscrn
Clears the screen.
create <group>
Creates a configurable pin (CP) group.
PremierWave EN Command Reference 72