User's Manual

5: Commands and Levels
user <username> generate rsa 512
Generate RSA public and private keys
user <username> generate rsa 768
Generate RSA public and private keys
user <username> password <password>
Set username with password and optional RSA or DSA keys
write
Stores the current configuration in permanent memory.
configure (config) level commands
arp
Changes to the command level for ARP configuration and status.
bridge <instance>
Changes to the bridge configuration level.
cli
Change to menu level for CLI configuration and status
clrscrn
Clears the screen.
diagnostics
Enters the diagnostics level.
exit
Exits to the enable level.
ftp
Enters the ftp level.
host <number>
Change to config host level
http
Enters the http level.
icmp
Changes to the command level for ICMP configuration and status.
if <instance>
Changes to the interface configuration level.
ip
Changes to the command level for IP configuration and status.
kill ssh <session>
Kills SSH session with index from "show sessions"
kill telnet <session>
Kills Telnet session with index from "show sessions"
query port
Enters the query port level.
rss
Change to menu level for RSS configuration and status
show
Displays system information.
show history
Displays the last 20 commands entered during the current CLI
session.
show lines
Displays line information.
smtp
Changes to the command level for SMTP configuration and sta-
tus.
syslog
Enters the syslog level.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be configured.
terminal network
Enters the configure-terminal level for the network.
vip
Change to menu level for VIP configuration and status
wlan profiles
Enters the WLAN profiles configuration level.
write
Stores the current configuration in permanent memory.
connect (tunnel-connect:3) level commands
block network disable
Forwards (tunnels) network data in connect mode tunneling.
block network enable
Discards all data coming in from the connect mode tunnel before
forwarding
it to the serial interface (generally used for debugging).
block serial disable
Forwards (tunnels) serial data in connect mode tunneling.
block serial enable
Discards all data coming in from the serial interface before for-
warding
it to the connect mode tunnel (generally used for debugging).
clrscrn
Clears the screen.
connect mode always
Enables the tunneling server to always establish tunneling con-
nections.
PremierWave EN Command Reference 60