User's Manual

5: Commands and Levels
no profile
Removes reference to the profile.
profile <text>
Selects a profile.
<text> = name of the profile.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
choice 2 (config-wlan-choice:wlan0:2) level commands
apply wlan
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no profile
Removes reference to the profile.
profile <text>
Selects a profile.
<text> = name of the profile.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
choice 3 (config-wlan-choice:wlan0:3) level commands
apply wlan
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no profile
Removes reference to the profile.
profile <text>
Selects a profile.
<text> = name of the profile.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
choice 4 (config-wlan-choice:wlan0:4) level commands
apply wlan
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no profile
Removes reference to the profile.
profile <text>
Selects a profile.
<text> = name of the profile.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
cli (config-cli) level commands
clrscrn
Clears the screen.
PremierWave EN Command Reference 58