User's Manual

5: Commands and Levels
enable
Enters the enable level.
exit
Exit from the system
iperf <params>
Run iperf with command line parameters passed in quoted string.
ping <host>
Ping destination continuously with 5 second timeout
ping <host> <count>
Ping destination n times with 5 second timeout
ping <host> <count> <timeout>
Ping destination n times with x timeout (in seconds)
show
Show system information
show history
Displays the last 20 commands entered during the current CLI
session.
show lines
Show line information
trace route <host>
Trace route to destination
trace route <host> <protocol>
Trace route to destination using TCP, ICMP, or UDP
rss (config-rss) level commands
clear rss
Clear the RSS Feed data
clrscrn
Clears the screen.
default max entries
Restores the default number of RSS feed entries.
exit
Exits to the configuration level.
feed disable
Disables RSS feed.
feed enable
Enables RSS feed.
max entries <number>
Sets the maximum number of RSS feed entries.
persist disable
Disables RSS feed data persistence.
persist enable
Enables RSS feed data persistence.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show status
Display the RSS Feed status
write
Stores the current configuration in permanent memory.
security (config-profile-security:test1) level commands
advanced
Switch to advanced level
apply wlan
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
basic
Switch to basic level
clrscrn
Clears the screen.
default key type
Restores the key type to the default value (passphrase).
default suite
Restores the security method (suite) to the default value (None).
exit
Exit to the profiles level
key type hex
Sets the key type to hex.
key type passphrase
Sets the key type to passphrase.
no passphrase
Removes the passphrase.
passphrase <text>
Sets the passphrase. Maximum 63 characters.
<text> = put quotes around characters that make up the pass-
phrase.
Please refer to the other equipment’s manual to determine the
passphrase
input style recommended.
NOTE: Lantronix recommends using a passphrase of 20 charac-
PremierWave EN Command Reference 197