User's Manual

5: Commands and Levels
write
Stores the current configuration in permanent memory.
password (tunnel-accept-password:2) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no password
Removes the password so connections will be accepted unchal-
lenged.
password <text>
Sets the password required on the network side of the tunnel to
begin
a connection.
prompt disable
Inhibits any prompting for password on the network side of the
tunnel.
prompt enable
Sets up so a user on the network side of the tunnel will be
prompted for
a password.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
password (tunnel-accept-password:1) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no password
Removes the password so connections will be accepted unchal-
lenged.
password <text>
Sets the password required on the network side of the tunnel to
begin
a connection.
prompt disable
Inhibits any prompting for password on the network side of the
tunnel.
prompt enable
Sets up so a user on the network side of the tunnel will be
prompted for
a password.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
query port (config-query_port) level commands
clear counters
Zeros Query Port counters
clrscrn
Clears the screen.
exit
Returns to the config level.
no clear counters
Unzeros Query Port counters
show
Displays statistics and information about the query port.
show history
Displays the last 20 commands entered during the current CLI
session.
state disable
Disables response to 77FE requests.
state enable
Permits response to 77FE requests.
write
Stores the current configuration in permanent memory.
root level commands
clrscrn
Clears the screen.
PremierWave EN Command Reference 196