User's Manual

5: Commands and Levels
no address
Removes the remote host address used to establish tunneling
connections.
no aes decrypt key
Removes the connect tunnel AES decrypt key.
no aes encrypt key
Removes the connect tunnel AES encrypt key.
no credentials
Clears the RSA/DSA certificate selection.
no port
Removes the remote port used to establish tunnel connections.
no ssh username
Removes the SSH user name.
no tcp keep alive
Disables the connect mode TCP keep alive timeout.
no vip name
Removes the VIP name.
port <number>
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
protocol ssh
Uses SSH protocol for connect mode tunneling.
protocol ssl
Uses SSL protocol for connect mode tunneling.
protocol tcp
Uses TCP protocol for connect mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for connect mode tunnel-
ing.
protocol telnet
Uses Telnet protocol (with IAC) for connect mode tunneling.
protocol udp
Uses UDP protocol for connect mode tunneling.
protocol udp aes
Uses UDP protocol with AES encryption for connect mode tunnel-
ing.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show statistics
show connection statistics
ssh username <text>
Sets the SSH user name for use when establishing tunneling
connections
with other devices.
<text> = SSH user name.
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and sets the
timer.
<milliseconds> = timer value, in milliseconds.
validate certificate disable
Skips verification of the server certificate when connecting.
validate certificate enable
Requires verification of the server certificate when connecting.
vip disable
Makes connections using the specified Address.
vip enable
Makes connections using the VIP name.
vip name <text>
Sets the VIP name.
write
Stores the current configuration in permanent memory.
host 9 (tunnel-connect-host:2:9) level commands
address <text>
Sets the remote host to establish tunneling connections with.
<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16 bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains spaces.
aes decrypt key text <text>
Sets the connect tunnel AES decrypt key with up to 16 bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains spaces.
aes encrypt key <hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16 bytes.
PremierWave EN Command Reference 173