Datasheet

Device Server IntelliBox-I/O 2100
15353 Barranca Parkway | Irvine | CA 92618 | USA | Tel: [phone] | Fax: [phone] | www.lantronix.com
©2007, Lantronix, Inc. Lantronix and IntelliBox are registered trademarks, and DeviceLinx, EventTrak and Evolution OS are trademarks of Lantronix, Inc. All other trademarks are the property of their
respective owners. Specifications subject to change without notice. All rights reserved. 910-513 01/08 DGS2500
Features and Specifications
Serial Interface
2 Serial ports: 1 RS232, 1 RS422/485 (4-wire/2-wire)
with terminal block connection
Baud rate selectable from 300 to 230 Kbps
Customizable baud rate support for non-standard
serial speeds
LED indicators for TXD and RXD activities
Serial Line Formats
Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd,even, none
Flow Control
Hardware:RTS/CTS
Software: XON/XOFF
Modem Control
CTS, RTS,DTR,DCD on Serial 1
Digital I/O
2 Independently configurable digital I/Os,configured
via GUI set-up Menu
Opto-isolated to eliminate grounding issues
Logically compatible with 3.3V level and also higher
voltage levels
Transient voltage and polarity reversal protection built in
Relay
Contacts are capable of handling up to 8A resistive load
Contacts are mechanically isolated to eliminate
grounding issues
Contacts are non-latching with Normally Open (NO) or
Normally Closed (NC) for simple application such as power
failure indication
Network Interface
1 RJ45 Ethernet port
10Base-T/100Base-TX
Full or half duplex
Auto-negotiating or hard coded
LED Indicators
10Base-T and 100Base-TX Link
Ethernet Activity
Serial Transmit Data
Serial Receive Data
Power / Status
Management
Internal web server
SNMP v2C (MIB-II, RS232MIB)
Serial login
Telnet/SSH login
XML
DeviceInstaller software
Power
Removable screw terminal block connector
9-30 VDC or 9-24 VAC with chassis ground
2.3W
Environmental
Temperature: -40°C to 75°C (-40° to 167°F) Operating
Temperature: -40°C to 85°C (-40° to 185°F) Storage
Humidity: 10% to 90% relative humidity, noncondensing
Agency Approvals
UL, CSA, FCC, CE,TUV, CTick,VCCI,FM Class 1,Div. 2
Protocols Supported
ARP, UDP/IP,TCP/IP,Telnet, ICMP,SNMP,DHCP,BOOTP,TFTP,
Auto IP, SMTP, FTP, DNS, Traceroute, HTTP
Industrial Application Protocols
Modbus TCP, Modbus ASCII/RTU
Ordering Information
Part Number Description
IBIO21002-01 IntelliBox-I/O 2100, 2 port IA device and I/O
server with EventTrak, worldwide power supply
with regional adapters.
CPU
Lantronix DSTNI-EX 120 MHz clock, 256 KB SRAM, 16 KB Boot
ROM Internal CPU Memory
Memory
4 MB Flash
2 MB SRAM
EEPROM
64 Kbits
Reset
Recessed push button
Packaging
Case: metal enclosure with wall mounts
IP30 enclosure rating
Dimensions: (L x W x H): 115 x 109 x 23 mm (4.54 x 4.30 x .90 in), terminal blocks included
Weight:0.3 kg (0.63 lb) (10 oz)
Shipping Dimensions (L x W x H)
254 x 216 x 70 mm (10 x 8.5 x 2.75 in.)
Warranty
2-year limited warranty
Isolation
1.5 KVAC / 2.1 KVDC galvanic isolation between power input port and Ethernet port (except chassis ground)
1.5 KVAC / 2.1 KVDC galvanic isolation between power input port and serial ports
1.5 KVAC / 2.1 KVDC galvanic isolation between Ethernet port and serial ports
1.5 KVAC / 2.1 KVDC opto-isolation between digital I/O ports and all other ports
1.5 KVAC / 2.1 KVDC mechanical isolation between Relay contacts and all other ports
8 KV direct contact, 15 KV air discharge, ESD protection on all serial ports (IEC 1000-4-2, IEC 61000-4-2)
40 A (5/50 ns) EFT protection (IEC 61000-4-4), 12 A (8/20 us) lightning protection (IEC 61000-4-5) on Ethernet port
Transient voltage protection and ESD at power input with max non-repetitive surge current 800 A (8/20 us) (IEC 61000-4-2)
Transient voltage protection and ESD with max non-repetitive surge power 600W peak (10/1000 us) at digital I/O ports
Sample Application