Technical Specs
Table Of Contents
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Contents
- List of Tables
- List of Figures
- 1: Introduction
- 2: Electrical Specifications
- 3: RF Specifications
- 4: Power
- 5: Software Interface
- 6: Mechanical and Environmental Specifica- tions
- 7: Regulatory Compliance and Industry Certifi- cations
- A: Antenna Specification
- B: Design Checklist
- C: Testing
- AT Command Entry Timing Requirement
- Acceptance Testing
- Certification Testing
- Production Testing
- Functional Production Test
- Quality Assurance Testing
- Suggested Testing Equipment
- Testing Assistance Provided by Lantronix, Inc.
- IOT/Operator Testing
- Extended AT Commands for Testing
- D: Packaging
- E: References
- F: Acronyms
Rev 5 May.21
9
41113694
Contents
Table 6-1: Mechanical and Environmental Specifications ................................................... 54
Table 7-1: Standards Compliance ....................................................................................... 57
Table 7-2: Antenna Gain and Collocated Radio Transmitter Specifications ........................ 58
Table A-1: Antenna Requirements ...................................................................................... 60
Table A-2: GNSS Antenna Requirements ........................................................................... 62
Table B-1: Hardware Integration Design
Considerations
...................................................... 64
Table 3-1: Test Settings—UMTS Transmission
Path
.......................................................... 70
Table 3-2: Test Settings—LTE Transmission
Path
............................................................. 72
Table 3-3: Test Settings—UMTS Receive Path .................................................................. 74
Table 3-4: Test Settings—LTE Receive Path ..................................................................... 76
Table 3-5: Extended AT
Commands
.................................................................................... 80
Table F-1: Acronyms and Definitions .................................................................................. 84