Technical Specs
Table Of Contents
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Contents
- List of Tables
- List of Figures
- 1: Introduction
- 2: Electrical Specifications
- 3: RF Specifications
- 4: Power
- 5: Software Interface
- 6: Mechanical and Environmental Specifica- tions
- 7: Regulatory Compliance and Industry Certifi- cations
- A: Antenna Specification
- B: Design Checklist
- C: Testing
- AT Command Entry Timing Requirement
- Acceptance Testing
- Certification Testing
- Production Testing
- Functional Production Test
- Quality Assurance Testing
- Suggested Testing Equipment
- Testing Assistance Provided by Lantronix, Inc.
- IOT/Operator Testing
- Extended AT Commands for Testing
- D: Packaging
- E: References
- F: Acronyms
Rev 5 May.21
32
41113694
Product
Technical
Specification
Host
Figure 2-8: Recommended Wireless Disable Connection
Full_Card_Power_Off# and RESET#
Note: Host support for Full_Card_Power_Off# is required, and support for RESET# is optional.
Full_Card_Power_Off# and RESET# are inputs to the module that the host uses as
described in Table 2-7.
For timing details, see Power On/Off Timing for the USB on page 50.
VCC
PMIC for W_DISABLE1#
100k
3
Wireless
disable control
10k
1
Q
R
2
Module