Technical Specs
Table Of Contents
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Contents
- List of Tables
- List of Figures
- 1: Introduction
- 2: Electrical Specifications
- 3: RF Specifications
- 4: Power
- 5: Software Interface
- 6: Mechanical and Environmental Specifica- tions
- 7: Regulatory Compliance and Industry Certifi- cations
- A: Antenna Specification
- B: Design Checklist
- C: Testing
- AT Command Entry Timing Requirement
- Acceptance Testing
- Certification Testing
- Production Testing
- Functional Production Test
- Quality Assurance Testing
- Suggested Testing Equipment
- Testing Assistance Provided by Lantronix, Inc.
- IOT/Operator Testing
- Extended AT Commands for Testing
- D: Packaging
- E: References
- F: Acronyms
Rev 5 May.21
15
41113694
Introduction
Supporting Documents
Several additional documents describe module design, usage, integration, and other
features. See References on page 83.
Accessories
A hardware development kit is available for AirPrime M.2 modules. The kit contains
hardware components for evaluating and developing with the module, including:
•
Development board
•
Cables
•
Antennas
•
Other accessories
For over-the-air LTE testing, ensure that suitable antennas are used.
Required Connectors
Table 1-4 describes the connectors used to integrate the EM7411 Embedded Module into
your host device.
Table 1-4:
Required Host-Module Connectors
a
Connector
type Description
RF cables
•
Mate with M.2-spec connectors
•
Three connector jacks (I-PEX 20448-001R-081 or equivalent)
EDGE (67 pin)
•
Slot B compatible—Per the M.2 standard ([8] PCI Express NGFF (M.2)
Electromechanical Specification Revision 1.0), a generic 75 pin position
EDGE connector on the motherboard uses a mechanical key to mate
with the 67 pin notched module connector.
•
Manufacturers include LOTES (part #APCI0018-P001A01), Kyocera,
JAE, Tyco, and Longwell.
SIM
•
Industry-standard connector. See SIM Interface on page 26 for details.
a. Manufacturers/part numbers are for reference only and are subject to change. Choose connectors
that are appropriate for your own design.
Ordering Information
To order, contact the Lantronix, Inc. Sales Desk at +1 (604) 232-1488 between 8 AM and
5 PM Pacific Time.
Integration Requirements
Lantronix, Inc. provides, in the documentation suite, guidelines for successful module
integration and offers integration support services as necessary.
When integrating the EM7411 Embedded Module, the following items must be addressed: