Users Manual Part 2

FOX3-2G/3G/4G HARDWARE MANUAL VERSION 2.2.5
This confidential document is a property of Lantronix and may not be copied or circulated without previous permission.
Page 38 of 48
Figure 19: Navigate to the USB CDC driver folder.
5. Follow the remaining prompts and Windows will install the driver.
Figure 20: Installing the USB drivers.
6. To find the COM port assigned to the FOX3, open Device Manager, go to "Connections" (as shown in
figure below).
Figure 21: Search for the assigned serial port number.
7. After installation is complete, you can delete the files you downloaded. Windows will reuse the installed
driver information for any future FOX3-2G/3G/4G devices.
8. To communicate with FOX3-2G/3G/4G via the USB port, use a Terminal program and select the USB
serial port number assigned by the Windows to the installed USB driver in the Device Manager.