Users Manual Part 1

FOX3-2G/3G/4G HARDWARE MANUAL VERSION 2.2.5
This confidential document is a property of Lantronix and may not be copied or circulated without previous permission.
Page 4 of 48
Version history:
This table provides a summary of the document revisions.
Version
Author
Changes
Modified
2.2.5
F. Beqiri
- Added ISED RF Exposure information in both English and French – see chapter 10
- Changed company logo to Lantronix.
08/14/2019
2.2.4
F. Beqiri
- The wakeup condition on “CAN” is only supported with command $PFAL,Sys.Device.Doze.
02/13/2018
2.2.3
F. Beqiri
- Added IOBOX-WLAN - It is an IOBOX-CAN with additional WLAN connectivity. The pinout on the
16pin connector is the same as on IOBOX-CAN.
08/22/2017
2.2.2
F. Beqiri
- Added FOX3-4G-NA
- Added a note when using digital outputs of the IOBOX-MINI and IOBOX-CAN – see tables in
chapter 7.5.2.2 and 7.5.2.3
26/06/2017
2.2.1
F. Beqiri
- Added all models of FOX3 series – See chapter 1.1
- Added table in chapter 1.2 - FOX3 series hardware differences.
- Added power consumption for FOX3-3G. Updated power consumption for FOX3 - See chapter
5.1.1
- Added operation frequencies for FOX3-3G – See chapter 5.1.3
- Changed USB driver from FTDI to CDC.
- Added new audio cable “CA81b” with with an integrated transformer that provides a full galvanic
isolation - See chapter 7.7, Audio Interface
09/02/2016
2.1.1
F. Beqiri
- Internal information
Cancelled
2.1.0
F. Beqiri
- Added FOX3-3G. There are four models of FOX3-3G available: FOX3-3G, FOX3-3G-LITE, FOX3-3G-
AU and FOX3-3G-BLE.
10/01/2016
1.0.9
F. Beqiri
- Updated power consumption - See chapter 5.1.1
- Updated chapter 7.5.2 - Connecting the IOBOX-CAN
- Added chapter 7.5.2.3 - IOBOX-CAN pinout
- Added the audio cable with integrated transformer and galvanic isolation (CA81b) - see chapter
7.7
20/07/2015
1.0.8
F. Beqiri
- Unnamed: PAID-FEATURE in PREMIUM-FEATURE
19/02/2015
1.0.7
F. Beqiri
- Added point 6 in chapter 7.5.1.1 - Activation of the setting/option "Load-VCP" after installing the
FTDI driver.
10/27/2014
1.0.6
F. Beqiri
- Added chapter 3.11.3, "Safety precautions when replacing the battery"
10/24/2014
1.0.5
F. Beqiri
- Added power consumption @ 24 VDC - see Table 3.1
01/07/2014
1.0.4
F. Beqiri
- Added: KA70 (3-Wires installation cable (V+, GND, IGN) - optional accessory)
16/05/2014
1.0.3
F. Beqiri
- Added: Power consumption @ 12 VDC - see chapter 5.1.1
- Added: Installing USB drivers - see chapter 7.5.1.1
14/05/2014
1.0.2
F. Beqiri
- Added figure 1 in chapter 1.1
30/01/2014
1.0.1
F. Beqiri
- Chapter 7.1.3 updated
27/01/2014
1.0.0
F. Beqiri
- Initial version.
15/12/2013