Users Manual Part 1

FOX3-2G/3G/4G HARDWARE MANUAL VERSION 2.2.5
This confidential document is a property of Lantronix and may not be copied or circulated without previous permission.
Page 17 of 48
5. TECHNICAL DATA
5.1. Product features
 Supply voltage range:
 Operating power supply voltage range of +10.8 V to +32.0 V, suitable for
direct connection to an automotive +12V or +24V DC power source
(vehicle battery).
 Power saving:
 10 different energy-saving modes - programmable with PFAL commands.
See chapter 6.1.3 for more details.
 Operating temperature range:
 - 40°C to + 85°C (see chapter 5.1.2 for more details).
 Physical characteristics:
 Size: 83.0 ± 0.5 mm x 105 ± 0.5 mm x 28.0 ± 0.5 mm
 Weight (without battery): ca. 130 gr.
 Physical Interfaces:
 Main Port (8pin row connector) comprising:
 3 x I/Os multi functional pins (each pin has dual functions as
analog or digital - software configurable. Each digital pin can
individually be set as an input or output)
 1 x Ignition pin (software controlled feature)
 1 x Power supply (software controlled feature)
 1 x Serial port (Rx, Tx), Baud rate is controlled by firmware
4800...115200 bps (default=115200 bps), 8 data bits, no parity, 1
stop bit, no flow control.
 Accessory Port (6pin row connector) comprising:
 1-Wire line for connecting 1-Wire slave devices, such as iButton,
temperature & humidity sensors etc.
 I²C interface
 1 x Serial port (Rx, Tx), Baud rate is controlled by firmware
4800...115200 bps (default=115200 bps), 8 data bits, no parity, 1
stop bit, no flow control.
 10pin mini-USB connector comprising:
 USB port
 SPI interface.
 Inside SIM card holder (supports 1.8/3 V SIM cards)
 Built-in 3D G-sensor for power management, motion and shock alarm
 3 x LED indicators (red, green, blue) free-programmable
 External ports for connecting a GSM / GNSS antenna
 Audio interface with 2.5 mm female jack for connecting a headset (FOX3
& FOX3-3G-AUDIO & FOX3-4G).