Users Manual Part 1

FOX3-2G/3G/4G HARDWARE MANUAL VERSION 2.2.5
This confidential document is a property of Lantronix and may not be copied or circulated without previous permission.
Page 10 of 48
Figure 4: FOX3-2G/3G/4G block diagram
1.5. Related documents
In addition to this document, the following files comprise the full set of FOX3-2G/3G/4G product manuals:
NR
PDF file name
Description
[1]
AVL_PFAL_Command_Set.pdf
Contains the description of the internal firmware and the supported Configuration
Command Set for the AVL devices.
[2]
AppNotes_Transform_history_data.pdf
Contains information of how to decode history data that are being transmitted
from an AVL device via TCP connection.
[3]
AppNote_Remote_update.pdf
Contains information of how to upgrade AVL devices to a new firmware revision
remotely via TCP (server based application).
[4]
AppNotes_AVL_Installation_Guide.pdf
This document provides all the necessary information how to install your product
properly and safely in a vehicle.
[5]
AppNotes_ECO-DRIVE-GPS.pdf
This document contains information of how to use the features of the GPS-ECO-
DRIVE supported as PREMIUM-FEATURE in the firmware version avl_2.11.0 and
above.
[6]
AppNotes_AES_TCP.pdf
This document contains information of how to use the features of the AES_TCP
(ADVANCED ENCRYPTION STANDARD) supported as PREMIUM-FEATURE in the
firmware version avl_2.10.0 and above.
[7]
AppNotes_HowToActivatePremiumFeatures.pdf
This document contains information of how to activate a PREMIUM-FEATURE on an
AVL device.
[8]
AVL_AppNote_RFID_Howto.pdf
This document contains information of how to connect and use an RFID-Reader
to/with AVL devices.
[9]
AppNotesForCANBusApplication.pdf
This document contains information of how to connect AVL devices to the vehicle
and how to configure and use the CAN-Bus features.
[10]
AppNote_CAN_FMS_CAN_OBDII_Howto.pdf
This document contains information of how to connect AVL devices to the vehicle
and how to configure and use the CAN-Bus/FMS/OBDII features.
[11]
AppNote_WebUpdate_Howto.pdf
This document contains information of how to upgrade an AVL device firmware
remotely over the air.
[12]
AppNote_Connecting_Barcode_Scanner.pdf
This document contains information of how to connect a bar code scanner to an
AVL device and how to transmit the scanned data.
[13]
AVL_Software_Update.pdf
Contains information how to upgrade an AVL device to a new firmware version
locally via serial port.
[14]
AppNotesRemoteUpdateWithWorkbench.pdf
Contains information how to upgrade AVL devices to a new firmware version
remotely via TCP.
[15]
AppNote_1-Wire_Guide.pdf
Contains information how to use the 1-Wire interface on the FOX3-2G/3G/4G/-4G