User Manual

Command Reference Show/Monitor/List Commands
12-107
See Also Netstat, page 12-17; Clear/Purge Protocol NetWare Access, page 12-7; Set/
Define Protocols Commands, page 12-56; Status Displays, page 6-9.
12.52.9 Show/Monitor Queue
Displays the entries in a particular local service’s connect queue, if it exists. Particular sets of queues or
entries can be selected with the parameters.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use the Monitor Queue command.
Parameters All
Displays all queue entries, regardless of type.
Node
Displays only connect requests from a specific network node.
nodename
Enter the name of the node whose queue you wish to view.
Port
Displays the entries that could be serviced by the specified port.
portnum
Enter a valid ETS port number.
Service
Displays the entries waiting for the specified service.
servicename
Enter the name of the service whose queue you wish to view.
Examples
Local> SHOW QUEUE Port 2
Local> MONITOR QUEUE Service lab5
See Also Set/Define Server Queue Limit, page 12-77; Status Displays, page 6-9.
SHOW
MONITOR



QUEUE
ALL
NODE nodename
PORT portnum
SERVICE servicename






