User Manual

Show/Monitor/List Commands Command Reference
12-102
Errors Nodes cannot be Listed.
Parameters NodeName
Displays information regarding only that node.
All (or *)
Displays information regarding all known LAT nodes on the network (the
default).
Counters
Displays LAT messages and error counters associated with the node(s). Note
that multicasts are not counted as messages in this field—only connection
messages are counted.
Status
Displays Summary information plus the node’s Ethernet address, the
service(s) offered, and the ident strings of those services.
Summary
Displays the nodes, their identifications strings, and the LAT protocol version
(the default).
Examples
Local> MONITOR NODE corky COUNTERS
See Also Set/Define Service LAT, page 12-88; Node Limit, page 4-3; Status Displays,
page 6-9; Printing to a Service, page 9-2.
12.52.7 Show/Monitor/List Ports
Displays information about the ETS’s ports. The current port is the default, unless an optional port
designation is specified.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use the Monitor Ports command.
Secure users cannot Show or List ports other than their own.
SHOW
MONITOR
LIST





PORTS
ALL
portnum
CHARACTERISTICS
COUNTERS
STATUS
SUMMARY