User Manual

Command Reference Show/Monitor/List Commands
12-101
12.52.4 Show/Monitor/List Logging
Displays the current or saved event logging configuration.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Errors Node information cannot be Listed.
See Also Set/Define Logging, page 12-25; Event Reporting/Logging, page 2-21; Event
Logging, page 4-18; Status Displays, page 6-9.
12.52.5 Show/Monitor/List Menu
Displays the current or saved menu entries.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Errors An error is returned if the are no menu entries configured.
See Also Clear/Purge Menu, page 12-6; Set/Define Menu, page 12-26; Menu Mode,
page 2-20; Menu Mode, page 5-14; Status Displays, page 6-9.
12.52.6 Show/Monitor Nodes
Displays information about all or a particular LAT service node(s). If the ETS has no knowledge of the
specified node, it will say so.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use the Monitor Nodes command.
SHOW
MONITOR
LIST





LOGGING
SHOW
MONITOR
LIST





MENU
SHOW
MONITOR



NODES
nodename
ALL
COUNTERS
STATUS
SUMMARY