User Manual

Show/Monitor/List Commands Command Reference
12-100
12.52 Show/Monitor/List Commands
12.52.1 Show/Monitor/List Dialback
Displays the currently-configured dialback strings, as well as the number of connect attempts and failures
associated with the strings.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use this command.
See Also Clear/Purge Dialback, page 12-5; Set/Define Port Dialback, page 12-36;
Modem Features, page 2-18; Dialback, page 5-11; Status Displays, page 6-9.
12.52.2 Show/Monitor/List Hosts
See Show/Monitor/List [Telnet] Hosts on page 12-113.
12.52.3 Show/Monitor/List IPsecurity
Displays the current or saved TCP/IP security table. Each address or address range is displayed including
the direction of concern and the list of ports affected by the entry.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Errors An error is returned if there are no IP security table entries.
See Also Clear/Purge IPsecurity, page 12-6; Set/Define IPsecurity, page 12-23;
Security, page 2-19; IP Security Table, page 4-16; Status Displays, page 6-9.
SHOW
MONITOR
LIST





DIALBACK
SHOW
MONITOR
LIST





IPSECURITY