User Manual

Command Reference Set/Define Service Commands
12-87
Parameters EndString
Any ASCII characters, or non-ASCII characters entered as a backslash and 2
hex digits (for example, \45). The combined length of the SOJ and EOJ strings
must not exceed 62 characters.
None
Clears any previously-configured string. No string is configured by default.
See Also Clear/Purge Service, page 12-7; Set/Define Service SOJ, page 12-91; Show/
Monitor/List Services, page 12-111.
12.47.7 Set/Define Service Formfeed
Determines whether the ETS will append a formfeed to the end of any LPR print jobs.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
See Also Clear/Purge Service, page 12-7; Show/Monitor/List Services, page 12-111;
TCP/Telnet Service Sockets, page 4-14.
12.47.8 Set/Define Service Identification
Specifies an identification string for this service to be sent by the ETS in multicast messages.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use this command.
Parameters IDstring
Enter up to 40 characters of identification information. Enclose the string in
quotes to preserve case and spaces.
None
Clears any previously-configured IDstring.
Examples
Local> SET SERVICE pplab5 IDENT “Printer for Lab 5”
See Also Clear/Purge Service, page 12-7; Show/Monitor/List Services, page 12-111.
SET
DEFINE



SERVICE ServiceName FORMFEED
ENABLED
DISABLED



SET
DEFINE



SERVICE ServiceName IDENTIFICATION
IDstring
NONE


