User Manual

Set/Define Server Commands Command Reference
12-74
12.46.25 Set/Define Server NetWare Loadhost
Used to specify the name of the NetWare file server to be used for downloading new software.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use this command.
Parameters ETSName
Enter a file server name of up to 11 characters. The null string (“ “) returns the
setting to undefined.
None
Clears the previously-configured loadhost.
Examples
Local> SET SERVER NETWARE LOADHOST FRED
See Also Set/Define Protocols NetWare Loadhost, page 12-59; Show/Monitor/List
Protocols, page 12-104; Editing the Boot Parameters, page 3-7.
12.46.26 Set/Define Server NetWare Printserver
Used to specify the name of the print server VAP/NLM running on the NetWare file server. This is
necessary when setting up the ETS as an RPRINTER client.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use this command.
Parameters ETSName
Enter a name of up to 8 characters. The null string (“ “) returns the setting to
undefined.
None
Clears the previously-configured setting.
Examples
Local> SET SERVER NETWARE PRINTSERVER FRED
See Also Set/Define Protocols NetWare Printserver, page 12-59; Show/Monitor/List
Protocols, page 12-104.
SET
DEFINE



SERVER NETWARE LOADHOST
ServerName
NONE



SET
DEFINE



SERVER NETWARE PRINTSERVER
ServerName
NONE


