User Manual

Command Reference Set/Define Port Commands
12-41
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports. Lists
of ports must be separated by commas. Ranges of ports must be separated by
a dash (-).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
Examples
Local> SET PORT GROUPS 4,5-9
See Also Set/Define Port Authorized Groups, page 12-28; Show/Monitor/List Ports,
page 12-102; Group Numbers, page 5-12.
12.43.20 Set/Define Port Inactivity Logout
Enables automatic logout of the port if it has been inactive for a set period of time and logs out any open
connections. Inactive is defined as having no keyboard or network activity on the port. The timer period is
set with the Set/Define Server Inactivity Timer command.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use this command.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports. Lists
of ports must be separated by commas. Ranges of ports must be separated by
a dash (-).
Note: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
See Also Set/Define Server Inactivity Timer, page 12-68; Show/Monitor/List Ports,
page 12-102; Inactivity Logout, page 5-16.
12.43.21 Set/Define Port Local
SET
DEFINE



PORT
PortList
ALL
INACTIVITY LOGOUT[]
ENABLED
DISABLED



SET
DEFINE



PORT
PortList
ALL
LOCAL
SWITCHcharacter
NONE


