User Manual

Send Command Reference
12-22
Service
Saves all entered Set Service commands for all local services or the named
service. If used without the All or name parameters, the local service
characteristics are saved.
SNMP
Saves all parameters associated with SNMP.
See Also Set and Define, page 3-4.
12.37 Send
Sends commands through the current Telnet or LAT session.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Parameters command
The command can be one of the following:
Examples
Local> SEND AYT
Local> SEND SYNCH
See Also LAT and TCP/IP Connectivity, page 2-15.
Table 12-4: Send Command Strings
Abbreviation Stands for
AO Abort Output (Telnet, LAT)
AYT Are You There (Telnet, LAT)
BRK Break (Telnet, LAT)
EC Erase Character (Telnet)
EL Erase Line (Telnet)
GA Go Ahead (Telnet)
IP Interrupt Process (Telnet, LAT)
NOP No Operation (Telnet)
SYNCH Synchronize (Telnet)
SEND command