User Manual

Command Reference Remove Queue
12-19
Errors Purge SLIP will return an error if the specified port does not have SLIP
enabled, or if the IP address specified is not associated with that port.
Parameters All
Clears all of the SLIP settings for the ETS (entries for all ports and the Default
ETS setting).
Port portnum
Clears the SLIP entry for the specified port only.
Default
Clears the default SLIP setting for the ETS.
Examples
Local> PURGE SLIP Port 4
See Also Set/Define SLIP, page 12-95; Show/List SLIP, page 12-112; Serial Line
Internet Protocol (SLIP), page 2-12; SLIP, page 4-6.
12.32 Remove Queue
Removes requests for local services from that service’s queue.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use this command.
Parameters All
Removes all requests in the local ETS queue.
Entry number
Removes the specified queue entry. Use the Show Queue command to display
the queues and entries by number.
Node NodeName
Removes all queue requests originating from the specified node.
Service ServiceName
Removes all requests queued to the specified local service.
REMOVE QUEUE
ALL
ENTRY number
NODE NodeName
SERVICE ServiceName






