User Manual

Clear/Purge Commands Command Reference
12-6
12.7.3 Clear/Purge IPsecurity
Removes an entry, or all entries, from the IP security table.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use this command.
Errors Clear IPsecurity will return an error if the specified entry isn’t found, or if All
is specified and no IP security entries have been configured.
Parameters IPaddress
Clears a particular entry from the IPsecurity table.
Examples
Local> PURGE IPSECURITY 192.0.1.255
Local> CLEAR IPSECURITY ALL
See Also Set/Define IPsecurity, page 12-23; Show/Monitor/List IPsecurity, page 12-
100; IP Security Table, page 4-16.
12.7.4 Clear/Purge Menu
Removes an entry, or entries, from the menu used in menu mode.
Applies To EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions You must be the privileged user to use this command.
Parameters MenuNum
Remove a specific menu entry by number. To view menu entries, enter the
Show Menu command.
Examples
Local> CLEAR MENU ALL
Local> CLEAR MENU 2
See Also Set/Define Menu, page 12-26; Show/Monitor/List Menu, page 12-101; Menu
Mode, page 5-14.
CLEAR
PURGE



IPSECURITY
ALL
IPaddress



CLEAR
PURGE



MENU
ALL
MenuNum


