User Manual

NetWare Host Setup Printing
8-9
Figure 8-20: Print Server Info/Status Menu
Note: If you don’t get the menu above, the file server could not contact the ETS for
some reason.
13 Select Down and press Enter.
Figure 8-21: Current Server Status
This will not reboot the ETS—it will only force it to re-scan the available file servers for new queue
entries.
14 Select Print Queue Information from the Available Options screen.
Press Escape repeatedly to return to the Available Options menu and the PCONSOLE utility.
15 Test the queue by using nprint.
Figure 8-22: Nprint Command
The file will be spooled to the ETS for printing and should appear on the proper physical port. If the
print port is in use, the NetWare job should be visible via the ETS Show Queue display.
8.3.5 Configuring Rprinter
Configuring a ETS service as an rprinter device prevents any other users from using the service. It will be
tied to the rprinter node for as long as the node is running and pserver is executing on the file server. Only
one rprinter node can be configured on the ETS, but multiple ports on the ETS can be tied to queues on that
node.
Print Server Info/Status
Print server version 3 0xx
Print server type Dedicated DOS
# of printers n
Queue service nodes 0
Current server status
Running
Serial number 006497
Current Server Info/Status
Down
Going down after current jobs
Running
C:> nprint c:\autoexec.bat /queue=TESTQ