User Guide

LPR Printing TCP/IP Configuration
4-10
5 The Add Remote Printer window will appear. SAM will prompt you for:
❍ The printer name (the name of the print queue),
❍ The remote system name (the EPS name),
❍ The remote printer name (the EPS service),
❍ The remote cancel model, and
❍ The remote status model.
4.2.6 LPR on SCO UNIX Hosts
LPR is supported in SCO V3.2 release 4 with TCP/IP Version 1.2 and greater.
To configure a print queue using LPR, issue the mkdev rlp command. This will install the
Berkeley remote printing files and executable programs.
Note: The mkdev rlp command should only be issued once, or serious prob-
lems will occur. If this happens, contact SCO technical support.
You can print to this queue using normal lp syntax once the remote printer is set up. To
create a remote printer:
1 Issue the rlpconf command.