User's Guide
Table Of Contents
- 1 Safety Precautions
- 2 About this Guide
- 3 E210 Series Compatible Models
- 4 Product Features
- 5 Installation
- 5.1 Package Contents
- 5.2 User Supplied Items
- 5.3 Optional Add-on
- 5.4 Accessories
- 5.5 Preparing to Install
- 5.6 Connecting the E210 Router
5: Installation
E210 Series Cellular Router User Guide 18
Figure 5-4: Web Admin Login Page
3. Log in to the Web Admin console. If the installed ePack firmware is version 2.4.4 and
higher, the default factory passwords are:
User Default Password
admin admin
root L@ntr0n1x
For password change requirements and for older firmware versions, please see
Default Configuration for Web Admin Page. We recommend that you set a unique,
strong password for the router and store the password in a secure location.
4. Next, you are ready to configure the network settings from the Quick Setup page.
To connect via Ethernet:
1. Connect an Ethernet cable between the LAN port on the front panel of the router and
the Ethernet port on the computer.
Figure 5-5: Router to Computer LAN Connection