User's Guide
Table Of Contents
- 1 Safety Precautions
- 2 About this Guide
- 3 E210 Series Compatible Models
- 4 Product Features
- 5 Installation
- 5.1 Package Contents
- 5.2 User Supplied Items
- 5.3 Optional Add-on
- 5.4 Accessories
- 5.5 Preparing to Install
- 5.6 Connecting the E210 Router
5: Installation
E210 Series Cellular Router User Guide 17
5.6.3 Connect the AC Power
To connect the AC power:
1. Connect the AC power to the DC in connector, then connect the Micro-Fit connector
to the power input, located on the front panel of the Lantronix Router.
2. Plug the AC cord into a standard AC receptacle as shown below. For connection
details, refer to Section 4.4, Front Panel Connections.
The power LED will light when power is applied.
Figure 5-3: Connecting the AC Power
5.6.4 Connect the Router to a Computer
Connect the router to your computer using the router's Wi-Fi access point or an Ethernet
cable and log in to the Web Admin page to verify the LAN connection.
To connect via Wi-Fi:
1. On the PC, connect to the router's Wi-Fi access point. The table below shows the
default wireless access point SSID.
Parameter Details
SSID
Lantronix E21X - for E210 series devices
Lantronix E22X - for E220 series devices
WPA/WPA2 TKIP Key W1rele$$
2. Open the browser to 192.168.1.1. The Web Admin Console log in page is displayed.