Network Device User Guide EDS4100, EDS8PR, EDS16PR, EDS32PR
Table Of Contents
- Contents
- Preface
- Introduction
- Installation: EDS4100
- Installation: EDS8PR, EDS16PR and EDS32PR
- Getting Started
- Configuration Using the Web Manager
- Network, Serial Line, and Tunnel Settings
- Services Settings
- Security Settings
- Maintenance and Diagnostics Settings
- Advanced Settings
- Updating Firmware
- Factory Default Configuration
- Technical Specifications
- Networking and Security
- Technical Support
- Lantronix Cables and Adapters
- Compliance
- Warranty
- Index
10: Maintenance and Diagnostics Settings
EDS Device Servers User Guide 102
Diagnostics: Traceroute Page
Clicking Traceroute from one of the Diagnostics pages displays the Diagnostics:
Traceroute page. Here you can trace a packet from the EDS to an Internet host, showing
how many hops the packet requires to reach the host and how long each hop takes. If
you visit a Web site whose pages appear slowly, you can use traceroute to determine
where the longest delays are occurring.
Figure 10-6 Diagnostics: Traceroute Page
Diagnostics: Traceroute Page
Diagnostics:
Traceroute
Page Settings
Description
Host Enter the IP address or DNS host name of the remote host that you want
to traceroute from the EDS.