User's Manual

DD399 MolecuLight DX® User Manual for Wi-Fi Certification
Page: 33 of 42
8. Tap CAPTURE.
9. A thumbnail will be displayed on the bottom left of the Imaging screen when the image is saved.
10. (Optional) Tap the thumbnail to review your image in full screen. To exit full screen mode, tap Close.
11. Continue to capture images or tap Back to return to the Wound screen.
To capture a Fluorescence video:
1. Turn off the room lights.
2. From the Imaging screen in Standard mode, tap the FL available icon to enter Fluorescence mode.
FL
available
Inactive
Active
3. Tap the Video/Still toggle to set it to Video capture mode.
4. Aim the device parallel to the wound.
5. Ensure the distance from the wound is acceptable and that the range finder indicator is green.
6. Centre the target in the middle of the field of view.
7. Tap the screen to focus on the target.
8. Tap START RECORDING. The device will begin recording and display a counter on the field of view to
count down from the maximum allowable video length of 30 seconds.
9. (Optional) Tap STOP RECORDING before the 30 seconds to capture a shorter video.
10. A thumbnail will be displayed on the bottom left of the Imaging screen when the video is saved.
11. (Optional) Tap the thumbnail to review your image in full screen. To exit full screen mode, tap Close.
12. Continue to capture images or tap Back to return to the Wound screen.
12.6 Measurement Image
Measurement imaging allow the user to capture a still measurement image in Measurement mode, which displays
the wound surface area, length, width and a manually entered depth (optional). Measurement images are
captures in *.jpeg format.
To capture a Measurement image:
1. From the Imaging screen, tap the Measurement mode icon.