User's Manual

DD399 MolecuLight DX® User Manual for Wi-Fi Certification
Page: 31 of 42
Tap the Fluorescence available icon to enter Fluorescence mode.
If the user attempts to enter Fluorescence mode when the ambient light is too high in the imaging environment
and the FL available icon is not present, the following warning will appear:
Screenshot.
If the user enters Fluorescence mode while the ambient light is too high in the imaging environment, an ambient
light sensor warning icon will be displayed in the field of view on the top right corner.
NOTE: The ambient light sensor warning icon will be imbedded onto the image when saved.
12.4 Standard Images and Videos
Standard digital imaging capabilities allow you to acquire and document standard digital images of dermatological
wounds.
The software allows you to capture a still image or a video in Standard mode. Still images are captures in *.jpeg
format and videos are captured in *.mov format.
To capture a Standard still image:
1. From the Imaging screen, tap the Standard mode icon.
Inactive
Active
2. Tap the Video/Still toggle to set it to Still capture mode.
3. Aim the device parallel to the wound.
4. Ensure the distance from the wound is acceptable and that the range finder indicator is green.
5. Centre the target in the middle of the field of view.
6. Tap the screen to focus on the target.
7. Tap CAPTURE.
8. A thumbnail will be displayed on the bottom left of the Imaging screen when the image is saved.
9. (Optional) Tap the thumbnail to review your image in full screen. To exit full screen mode, tap Close.
10. Continue to capture images or tap Back to return to the Wound screen.
To capture a Standard video:
1. From the Imaging screen, tap the Standard mode icon.