User's Manual
DD399 MolecuLight DX® User Manual for Wi-Fi Certification
Page: 29 of 42
3
Camera/video icon. Default setting is camera. Tap the Camera/Video toggle to
switch from camera to video mode and vice versa.
NOTE: Video is available for Standard and Fluorescence mode.
NOTE: If video is unavailable, go to Settings and enable the Video Capture
option.
4
Torch icon. Tap Torch toggle to enable/disabled. Available in Standard mode.
5
Saved thumbnail. When an image is captured, a thumbnail is displayed. Tap the
thumbnail to view the just captured image in full screen.
6
Range. For Fluorescence mode, capture images within the acceptable range to
ensure the best results. Capture images only when the range icon appears
green.
NOTE: If you hold the device too far or too close, messages will be displayed on
the image area to instruct you to move the device closer or father away, when
in fluorescence mode.
7
Active field of view. Screen will display what is currently in front of the device
camera.
8
Capture button. Tap Capture to save what is displayed in the field of view. An
audible shutter sound will be heard when an image is captured.
9
Fluorescence icon. Tap Fluorescence to capture a Fluorescence image.
White icon = inactive, blue icon = active.
10
Standard icon. Tap Standard to capture a Standard image. Standard is the
default mode when entering the Imaging screen.
White icon = inactive, blue icon = active.
11
Measurement icon. Tap Measurement to capture a measurement image.
White icon = inactive, blue icon = active.
12.1 Focus
The software provides a focus feature you can engage by tapping the screen while viewing the active field of view.
A white square graphic will be displayed in the field of view while the camera is actively focusing.
The software also provides an auto motion focus feature whereby the camera will automatically focus whenever
motion is detected.
The focus graphic will default to the center of the screen and applies to both Camera and Video image capture.
Using focus to capture an image/video:
1. Locate the desired target in the field of view.
2. Ensure the distance between the device and the target is in the acceptable range (green).
3. Tap the screen where the target area is to engage the focus feature.