User's Manual

DD399 MolecuLight DX® User Manual for Wi-Fi Certification
Page: 18 of 42
10.2 Adding a Wound
If a wound is not already listed for the current patient, you must add a new wound.
1. On the View Patient screen, tap Add.
2. On the Add Wound screen, tap the Wound Location text field and using the keyboard enter the wound
location.
3. Tap the Wound Type drop-down menu and select a wound type from the list.
NOTE: Only fields marked with a red asterisk are required to save a new wound.
4. Tap SAVE.
5. New wound is saved, and a confirmation message is displayed.
10.3 Searching the Wound list
1. On the View Patient screen, if the patient has more than 2 wounds, a scrollable list will become available.
2. Using a tap, drag and finger swipe from the bottom to top of the screen, scroll through the wound
thumbnail list.
3. Tap the wound thumbnail to load the Wound screen for that wound.
10.4 Editing Patient
You can edit an existing patient if data was entered incorrectly, if their consent has changed or if their status has
changed.
1. On the Patient Directory screen, tap on any information for the patient you want to edit. The View Patient
screen will be displayed.
2. Tap More.