User's Manual

DD399 MolecuLight DX® User Manual for Wi-Fi Certification
Page: 16 of 42
7. New user is saved, and a confirmation message is displayed.
9.2 Filtering the Patient Directory
When a new patient is added, their status defaults to Active. You can edit a patient’s status to Inactive at any time
from the Edit Patient screen.
When a patient’s status is Inactive, you will not be able to add a wound or any images to existing wounds.
1. On the Patient Directory screen, tap Filter.
2. A menu is displayed.
3. Tap either Active Patients or Inactive Patients checkbox to filter the list. The Patient Directory is
automatically filtered according to your selection.
NOTE: The filter you select will remain enabled until you uncheck the filter checkboxes, go to a different
screen (ie. Add Patient screen) or log out of the device.
9.3 Searching the Patient Directory
Search the Patient Directory to easily find a patient using either their name or MRN.
You can also search the Patient Directory when a filter is enabled.
1. On the Patient Directory screen, tap Search.
2. A search bar will be displayed at the top of the screen.
3. Tap inside the search bar and a keyboard will be displayed. Enter text to search by either the patient
name or MRN.
4. Tap Search on the keyboard. The patient list will be filtered according to what was entered.