User's Manual

DD399 MolecuLight DX® User Manual for Wi-Fi Certification
Page: 11 of 42
Attaching the device to the docking station:
1. Ensure the docking station is placed on a stable, flat surface.
2. Ensure the USB-C charging cable is not attached to the device before placing it on the docking station.
NOTE: The device will not sit properly on the docking station with a USB-C cable attached to the device.
3. Ensure the device USB-C charging port cover is closed.
4. Log out of the device.
5. Place the device on the docking station as pictured above. Edges on the docking station and device
connect in order to prevent the device from sliding off the docking station.
6. When the device is charging, the battery LED (to the right of the power button) will be flashing green.
7. The battery LED will flash different colours depending on the device condition:
a. blink quickly red: connected to a charger and battery level is low
b. blink quickly amber: connected to a charger and battery level is medium
c. blink quickly green: connected to a charger and battery level is good
d. green: connected to a charger and charging is complete
8. When the device is placed properly on the docking station, the device should look like the following:
Battery LED