User Guide

Open-Q 626 SOM Module Certification OEM Integrator Guide 3
Revision History
Date
Rev.
Comments
March 2019
1.0
Initial release.
Intrinsyc document number: ICS-01RND1278-TN-068
May 2019
1.1
Corrected typo on Title page and changed formatting of
Allowable Antennas section, updated Antenna Gain in
Antenna Information for Industry Canada and added 5GHz
statement in FCC Interference Statement and Industry
Canada Statements. Removed duplicate Antenna
information on page 10 that is already on page 4.
September 2020
A
Initial Lantronix document.
Added Lantronix document part number, Lantronix logo,
branding, contact information, and links.
For the latest revision of this product document, please go to: http://tech.intrinsyc.com
.
Note: The Lantronix Open-QTM 626 SOM radio module (the “Module”) is certified for
compliance for use in the USA and Canada only. For use in other countries, certificates of
compliance must be obtained for that country or region before the module can be sold,
operated or incorporated into products. In addition, any deviation from the settings,
methods, conditions and restrictions for integration of the Module into a host system, as
defined in this document, could be a violation of applicable national law and may be
punishable as such, and in such event, the products into which the Module is incorporated
may not be lawfully distributed or sold in such countries. Lantronix assumes no responsibility
for any such liability or loss related to installation or operation of the Module.